Page 1 of 1 (2 posts)

  • talks about »
  • landsat

Tags

Last update:
Sat Aug 30 13:10:09 2014

A Django site.

QGIS Planet

Processing Landsat 8 data in GRASS GIS 7: RGB composites and pan sharpening

banner_pansharpening

In our first posting (“Processing Landsat 8 data in GRASS GIS 7: Import and visualization“) we imported a Landsat 8 scene (covering Raleigh, NC, USA). In this exercise we use Landsat data converted to reflectance with i.landsat.toar as shown in the first posting.

Here we will try color balancing and pan-sharpening, i.e. applying the higher resolution panchromatic channel to the color channels, using i.landsat.rgb.

1. Landsat 8 – RGB color balancing: natural color composites

After import, the RGB (bands 4,3,2 for Landsat 8) may look initially less exciting than expected.This is easy to fix by a histogram based auto-balancing of the RGB color tables.

landsat8_rgb_composite_unbalanced

To brighten up the RGB composite, we can use the color balancing tool of GRASS GIS 7:

grass7_landsat_rgb0

As input, we specify the bands 4, 3, and 2:

grass7_landsat_rgb1

Using a “Cropping intensity (upper brightness level)” of 99 (percent), the result look as follows:

landsat10_rgb_composite_autobalance_99percent_crop

For special purposes or under certain atmospheric/ground conditions it may be useful to make use of the functions “Preserve relative colors, adjust brightness only” or “Extend colors to full range of data on each channel” in the “Optional” tab of i.landsat.rgb.

landsat9_rgb_composite_preserve_relative_colors

You will need to experiment since the results depend directly on the image data.

2. Landsat 8 pansharpening

Pansharpening is a technique to merge the higher geometrical pixel resolution of the panchromatic band (Band 8) with the lower resolution color bands (Bands 4, 3, 2).

GRASS GIS 7 offers several methods through the command i.pansharpen.

1) Brovey transform:

landsat8_pansharpen_brovey1

This module runs in multi-core mode parallelized. The management of the resolution (i.e., apply the higher resolution of the panchromatic band) is performed automatically.

landsat8_pansharpen_brovey2

2. IHS transform

Here we select as above the bands in the i.pansharpen interface but use the “ihs” method.

landsat8_pansharpen_ihs1

HINT: If the colors should look odd, then apply i.landsat.rgb to the pan-sharpened bands (see above).

Color-adjusted IHS pansharpening (with “Cropping intensity: strength=99″):

landsat8_pansharpen_ihs_color_adjusted

Comparison of Landsat 8 RGB composite (39m) and IHS pansharpened RGB composite (15m):

landsat8_rgb432_color_adjusted_zoom landsat8_rgb432_pansharpen_ihs_color_adjusted_zoom

3. PCA transform

Here we select as above the bands in the i.pansharpen interface but use the “pca” method.

landsat8_pansharpen_pca1

Likewise other channels may be merged with i.pansharpen, even when originating from different sensors.

3. Conclusions

Overall, the IHS pansharpening method along with auto-balancing of colors appears to perform very well with Landsat 8.

Processing Landsat 8 data in GRASS GIS 7: Import and visualization

banner_landsat_rgb

For our analysis example, we’ll obtain (freely – thanks, NASA and USGS!) a Landsat 8 scene from http://earthexplorer.usgs.gov/

First of all, you should register.

1. Landsat 8 download procedure

1. Enter Search Criteria:

  • path/row tab, enter Type WRS2: Path: 16, Row: 35
  • Date range: 01/01/2013 – today
  • Click on the “Data sets >>” button

2. Select Your Data Set(s):

  • Expand the entry + Landsat Archive
        [x] L8 OLI/TIRS
  • Click on the “Results >>” button

(We jump over the additional criteria)

4. Search Results

From the resulting list, we pick the data set:

earthexplorer_selection_lsat8Entity ID: LC80160352013134LGN03
Coordinates: 36.04321,-79.28696
Acquisition Date: 14-MAY-13

Using the “Download options”, you can download the data set (requires login). Select the choice:
[x] Level 1 GeoTIFF Data Product (842.4 MB)

You will receive the file “LC80160352013134LGN03.tar.gz”.

2. Unpacking the downloaded Landsat 8 dataset

To unpack the data, run (or use a graphical tool at your choice):

tar xvfz LC80160352013134LGN03.tar.gz

A series of GeoTIFF files will be extracted: LC80160352013134LGN03_B1.TIF, LC80160352013134LGN03_B2.TIF, LC80160352013134LGN03_B3.TIF, LC80160352013134LGN03_B4.TIF, LC80160352013134LGN03_B5.TIF, LC80160352013134LGN03_B6.TIF, LC80160352013134LGN03_B7.TIF, LC80160352013134LGN03_B8.TIF, LC80160352013134LGN03_B9.TIF, LC80160352013134LGN03_B10.TIF, LC80160352013134LGN03_B11.TIF, LC80160352013134LGN03_BQA.TIF

We may check the metadata with “gdalinfo“:

gdalinfo LC80160352013134LGN03_B1.TIF
Driver: GTiff/GeoTIFF
Files: LC80160352013134LGN03_B1.TIF
Size is 7531, 7331
Coordinate System is:
PROJCS["WGS 84 / UTM zone 17N",
    GEOGCS["WGS 84",
        DATUM["WGS_1984",
            SPHEROID["WGS 84",6378137,298.257223563,
...
Pixel Size = (30.000000000000000,-30.000000000000000)
...

3. Want to spatially subset the Landsat scene first?

If you prefer to cut out a smaller area (subregion), check here for gdal_translate usage examples.

4. Import into GRASS GIS 7

Note: While this Landsat 8 scene covers the area of the North Carolina (NC) sample dataset, it is delivered in UTM rather than the NC's state plane metric projection. Hence we preprocess the data first in its original UTM projection prior to the reprojection to NC SPM.

Using the Location Wizard, we can import the dataset easily into a new location (in case you don't have UTM17N not already created earlier):

grass70 -gui

grass7_loc_wizard1
grass7_loc_wizard2
grass7_loc_wizard3
grass7_loc_wizard4
grass7_loc_wizard5
grass7_loc_wizard6
grass7_loc_wizard7
grass7_loc_wizard8
grass7_loc_wizard9

 

 

 

Now start GRASS GIS 7 and you will find the first band already imported (the others will follow shortly!).

For the lazy folks among us, we can also create a new GRASS GIS Location right away from the dataset on command line:

grass70 -c LC80160352013134LGN03_B10.TIF ~/grassdata/utm17n

5. Importing the remaining Landsat 8 bands

The remaining bands can be easily imported with the raster import tool:

grass7_import1

The bands can now be selected easily for import:

grass7_import2

  • Select "Directory" and navigate to the right one
  • The available GeoTIFF files will be shown automatically
  • Select those you want to import
  • You may rename (double-click) the target name for each band
  • Extend the computation region accordingly automatically

Click on "Import" to get the data into the GRASS GIS location. This takes a few minutes. Close the dialog window then.

In the "Map layers" tab you can select the bands to be shown:

grass7_visualize1

6. The bands of Landsat 8

(cited from USGS)

Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) images consist of nine spectral bands with a spatial resolution of 30 meters for Bands 1 to 7 and 9. New band 1 (ultra-blue) is useful for coastal and aerosol studies. New band 9 is useful for cirrus cloud detection. The resolution for Band 8 (panchromatic) is 15 meters. Thermal bands 10 and 11 are useful in providing more accurate surface temperatures and are collected at 100 meters. Approximate scene size is 170 km north-south by 183 km east-west (106 mi by 114 mi).

Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS)Launched February 11, 2013 Bands Wavelength (micrometers) Resolution (meters)
Band 1 - Coastal aerosol 0.43 - 0.45 30
Band 2 - Blue 0.45 - 0.51 30
Band 3 - Green 0.53 - 0.59 30
Band 4 - Red 0.64 - 0.67 30
Band 5 - Near Infrared (NIR) 0.85 - 0.88 30
Band 6 - SWIR 1 1.57 - 1.65 30
Band 7 - SWIR 2 2.11 - 2.29 30
Band 8 - Panchromatic 0.50 - 0.68 15
Band 9 - Cirrus 1.36 - 1.38 30
Band 10 - Thermal Infrared (TIRS) 1 10.60 - 11.19 100
Band 11 - Thermal Infrared (TIRS) 2 11.50 - 12.51 100

* TIRS bands are acquired at 100 meter resolution, but are resampled to 30 meter in delivered data product.

7. Natural color view (RGB composite)

Due to the introduction of a new "Cirrus" band (#1), the BGR bands are now 2, 3, and 4, respectively. See also "Common band combinations in RGB" for Landsat 7 or Landsat 5, and Landsat 8.

From Digital Numer (DN) to reflectance:
Before creating an RGB composite, it is important to convert the digital number data (DN) to reflectance (or optionally radiance). Otherwise the colors of a "natural" RGB composite do not look convincing but rather hazy (see background in the next screenshot). This conversion is easily done using the metadata file which is included in the data set with i.landsat.toar:

grass7_landsat_toar0
grass7_landsat_toar1
grass7_landsat_toar2
grass7_landsat_toar3

Now we are ready to create a nice RGB composite:

grass7_landsat_rgb0

grass7_landsat_rgb1

Select the bands to be visually combined:

grass7_visualize2

... and voilà!

grass7_landsat_rgb2

8. Applying the Landsat 8 Quality Assessment (QA) Band

One of the bands of a Landsat 8 scene is named "BQA" which contains for each pixel a decimal value representing a bit-packed combination of surface, atmosphere, and sensor conditions found during the overpass.  It can be used to judge the overall usefulness of a given pixel.

We can use this information to easily eliminate e.g. cloud contaminated pixels. In short, the QA concept is (cited here from the USGS page):

Cited from http://landsat.usgs.gov/L8QualityAssessmentBand.php‎

For the single bits (0, 1, 2, and 3):
0 = No, this condition does not exist
1 = Yes, this condition exists.

The double bits (4-5, 6-7, 8-9, 10-11, 12-13, and 14-15) represent levels of confidence that a condition exists:
00 = Algorithm did not determine the status of this condition
01 = Algorithm has low confidence that this condition exists (0-33 percent confidence)
10 = Algorithm has medium confidence that this condition exists (34-66 percent confidence)
11 = Algorithm has high confidence that this condition exists (67-100 percent confidence).

Detailed bit patterns (d: double bits; s: single bits):
d  Bit 15 = 0 = cloudy
d  Bit 14 = 0 = cloudy
d  Bit 13 = 0 = not a cirrus cloud
d  Bit 12 = 0 = not a cirrus cloud
d  Bit 11 = 0 = not snow/ice
d  Bit 10 = 0 = not snow/ice
d  Bit 9 = 0 = not populated
d  Bit 8 = 0 = not populated
d  Bit 7 = 0 = not populated
d  Bit 6 = 0 = not populated
d  Bit 5 = 0 = not water
d  Bit 4 = 0 = not water
s  Bit 3 = 0 = not populated
s  Bit 2 = 0 = not terrain occluded
s  Bit 1 = 0 = not a dropped frame
s  Bit 0 = 0 = not fill

Usage example 1:  Creating a mask from a bitpattern

We can create a cloud mask (bit 15+14 are set) from this pattern:
cloud:   1100000000000000

Using the Python shell tab, we can easily convert this into the corresponding decimal number for r.mapcalc:

Cited from http://landsat.usgs.gov/L8QualityAssessmentBand.php‎

Welcome to wxGUI Interactive Python Shell 0.9.8

Type "help(grass)" for more GRASS scripting related information.
Type "AddLayer()" to add raster or vector to the layer tree.

Python 2.7.5 (default, Aug 22 2013, 09:31:58) 
[GCC 4.8.1 20130603 (Red Hat 4.8.1-1)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> int(0b1100000000000000)
49152

Using this decimal value of 49152, we can create a cloud mask:

# set NULL for cloudy pixels, 1 elsewhere:
r.mapcalc "cloudmask = if(LC80160352013134LGN03_BQA == 49152, null(), 1 )"

# apply this mask
r.mask cloudmask

In our sample scene, there are only tiny clouds in the north-east, so no much to be seen. Some spurious cloud pixels are scattered over the scene, too, which could be eliminated (in case of false positives) or kept.

Usage example 2:  Querying the Landsat 8 BQA map and retrieve the bitpattern

Perhaps you prefer to query the BQA map itself (overlay the previously created RGB composite and query the BSA map by selecting it in the Layer Manager). In our example, we query the BQA value of the cloud:

Using again the Python shell tab, we can easily convert the decimal number (used for r.mapcalc) into the corresponding binary representation to verify with the  table values above.

>>> x=61440
>>> print(bin(x & 0xffffffff))
0b1111000000000000

Hence, bits 15,14,13, and 12 are set: cloudy and not a cirrus cloud. Looking at the RGB composite we tend to agree :-) Time to mask out the cloud!

wxGUI menu >> Raster >> Mask [r.mask]

Or use the command line, as shown already above:

# remove existing mask (if active)
r.mask -r

# set NULL for cloudy pixels, 1 elsewhere:
r.mapcalc "cloudmask = if(LC80160352013134LGN03_BQA == 61440, null(), 1 )" --o

# apply the new mask
r.mask cloudmask

The visual effect in the RGB composite is minimal since the cloud is white anyway (as NULL cells, too). However, it is relevant for real calculations such as NDVI (vegetation index) or thermal maps.

We observe dark pixels around the cloud originating from thin clouds. In a subsequent identification/mask step we may eliminate also those pixels with a subsequent filter.

  • Page 1 of 1 ( 2 posts )
  • landsat

Back to Top

Sponsors